###### RESEARCH/CREATIVE ACTIVITY – Refereed Journal:

- *A. Ehsani†, H. Dalir, “Multi-Objective Design Optimization of Variable Ribs Composite Grid Plates”,
, https://doi.org/10.1007/s00158-020-02672-7.*Structural and Multidisciplinary Optimization (2020)* - *R. Moheimani†, H. Dalir, “Static and Dynamic Solutions of Functionally Graded Micro/nanobeams”,
*Vibration (2020),**pp. 51-69.* - *A. Pasharavesh†, R. Moheimani†, H. Dalir, “Nonlinear energy harvesting from vibratory disc-shaped piezoelectric laminates”,
253-261.*Theoretical and Applied Mechanics Letters (2020),* - *R. Moheimani†, A. Pasharavesh†, H. Dalir, “The effect of finite electrical conductivity of small-scale beam resonators on their vibrational response under electrostatic fields”,
pp. 461-474.*International Journal of Mechanics and Materials in Design (2020),* - *R. Moheimani†, R. Sarayloo†, H. Dalir, “Failure study of fiber/epoxy composite laminate interface using cohesive multiscale model”,
pp. 1-19.*Advanced Composites Letters 29 (2020),* - *A. Pasharavesh†, R. Moheimani†, H. Dalir, “Performance Analysis of an Electromagnetically Coupled Piezoelectric Energy Scavenger”,
pp. 845 (19).*Energies 13 (2020),* - *N. Aliheidari†, N. Aliahmad††, M. Agarwal and H. Dalir, “Electrospun Nanofibers for Label-Free Sensor Applications”,
pp. 3587(27).*Sensors 19 (2019),* - *A. Ehsani† and H. Dalir, “Multi-objective optimization of composite angle grid plates for maximum buckling load and minimum weight using genetic algorithms and neural networks”,
, pp. 310-317.*Composite Structures 229 (2019)* - *A. Ehsani† and H. Dalir, “Influence of employing laminated isogrid configuration on mechanical behavior of grid structures”,
pp. 777-785.**Journal of Reinforced Plastics and Composites 38 (2019),** - *A. Patil†, R. Moheimani† and H. Dalir, “Thermomechanical Analysis of Composite Plates Curing Process Using ANSYS Composite Cure Simulation”,
, pp. 204-212.*Thermal Science and Engineering Progress 41 (2019)* - *M. Kamble†, T. Shakfeh, R. Moheimani† and H. Dalir, “Optimization of a Composite Monocoque Chassis for Structural Performance: A Comprehensive Approach”,
, pp. 41-53.*Journal of Failure Analysis and Prevention 49 (2019)* - *M. Damadam††, R. Moheimani† and H. Dalir, “Bree's diagram of a functionally graded thick-walled cylinder under thermo-mechanical loading considering nonlinear kinematic hardenin”, Case Studies in
pp. 644-654.*Thermal Engineering 12 (2018),* - *F. Michaud†, H. Dalir and S. Joncas, “Structural design and optimization of an aircraft morphing wing: Composite skin”,
pp. 195-211.*Journal of Aircraft 55 (2018),* - H. Dalir, R. D. Farahani, L. Hernandez, C. Aldebert, M. Lévesque and D. Therriault, “Three-dimensional dielectrophoretic microparticle separator fabricated by ultraviolet-assisted direct-write assembly”,
, pp. 765-771.*Journal of Nanoscience and Nanotechnology 16 (2016)* - R. D. Farahani, M. Pahlavanpour, H. Dalir, B. Aissa, M. A. E. Khakani, M. Lévesque, and D. Therriault, “Part Redesign: From Fastened Assembly to Co-Cured Concept”,
pp. 328-334.*SAE International Journal of Aerospace 6 (2013),* - R. D. Farahani, M. Pahlavanpour, H. Dalir, B. Aissa, M. A. E. Khakani, M. Lévesque, and D. Therriault, “Flow-induced orientation of functionalized single-walled carbon nanotubes embedded in epoxy using three-dimensional microfluidic networks”,
, pp. 214-225.*Materials and Design 41 (2012)* - R. D. Farahani, H. Dalir, V.L. Borgne, L. A. Gautier, M. A. E. Khakani, M. Lévesque, and D. Therriault, “Reinforcing epoxy nanocomposites with functionalized carbon nanotubes via biotin-streptavidin interactions”,
pp. 1387-1395.*Composites Science and Technology 72 (2012),* - H. Dalir, R. D. Farahani, V. Nhim, B. Samson, M. Lévesque and D. Therriault, “Preparation of highly exfoliated polyester-clay nanocomposites: process-property correlations”,
, pp. 791-803.*Langmuir 28 (2012)* - R. D. Farahani, H. Dalir, V.L. Borgne, L. A. Gautier, M. A. E. Khakani, M. Lévesque, and D. Therriault, “Direct-write fabrication of freestanding nanocomposite strain sensors”,
pp. 1-9. Featured on the cover page of the Journal published on the March 2, 2012.*Nanotechnology 23 (2012),* - H. Dalir, R. D. Farahani, V. Nhim, B. Samson, M. Lévesque and D. Therriault, “Microstructural and Mechanical Properties of Polyester/Nanoclay Nanocomposites: Microstructure-Mixing Strategy Correlation”,
, ii02-05 (9 pages).*Material Research Society 1312 (2011)* - R. D. Farahani, H. Dalir, Brahim Aissa, My Ali El Khakani, Martin Lévesque and Daniel Therriault, “Micro-infiltration of three-dimensional porous networks with carbon nanotube-based nanocomposite for material design”,
, pp. 1910-1919.*Composites Part A 42 (2011)* - H. Dalir, T. Nisisako, Y. Yanagida, and T. Hatsuzawa, “DNA force-extension curve under uniaxial stretching”,
, pp. 221-228.*Molecular Simulation 36 (2010)* - H. Dalir, Y. Yanagida, and T. Hatsuzawa, “Probing DNA mechanical characteristic by dielectrophoresis”,
, pp. 472-478.*Sensors and Actuators B 136 (2009)* - H. Dalir, Y. Yanagida, and T. Hatsuzawa, “Multipolar electrical forces for microscale particle manipulation”,
, pp. 505-513.*Journal of Computational and Theoretical Nanoscience 6 (2009)* - H. Dalir, S. Shayan Amin, and A. Farshidianfar, “Effects of Small length scale on vibrations of an embedded double-walled carbon nanotube”,
, pp. 557-566.*Mechanics of Composite Materials 45 (2010)* - S. Shayan Amin, H. Dalir, and A. Farshidianfar, “Carbon nanotube reinforced Composites: frequency analysis theories based on the matrix stiffness”,
, pp. 515-524.*Computational Mechanics 43 (2009)* - M. H. Mahdavi, A. Farshidianfar, M. Tahani, S. Mahdavi and H. Dalir, “A more comprehensive modeling of atomic force microscope cantilever”,
, pp. 54-60.*Ulramicroscopy 109 (2008)* - S. Shayan Amin, H. Dalir, and A. Farshidianfar, “Molecular dynamics simulation of double-walled carbon nanotube vibrations: comparison with continuum elastic therories”,
, pp. 337-343.*Journal of Mechanics 25 (2009)* - M. H. Mahdavi, A. Farshidianfar, and H. Dalir, “Flextural vibration of atomic force microscope cantilever with dimensional effects”,
, pp. 19-26.*Amirkabir Journal of Science and Technology 41 (2009)*